PS4 Fan Clean
PS4 Fan Clean
Sharing is caring
  •  
  •  
  •  
  •  
  •  
  •  

Are you searching for How to do PS4 fan clean? you have arrived at the right place, here we will discuss the complete process of PS4 fan clean. read the article through the end and clear all the questions that come to your mind.

If you’ve had a PlayStation 4 for a while, chances are that it runs a lot louder than it did when you bought it. This is because dust accumulates over time and eventually clogs up the fan, causing it to work harder and produce more noise. In extreme cases, this can lead to the console overheating and becoming damaged.

PS4 fan clean: Dust and other particles can accumulate over time on the internal parts of your Playstation 4, which can cause the fan to run loudly and overheat the system. By periodically opening up your PS4 and cleaning it out, you can help keep it running smoothly and quietly.

First, unplug your PS4 from the power outlet and remove the hard drive. Next, use a Phillips head screwdriver to remove the screws on the back of the system. Once these are removed, you can gently pull off the top cover of the PS4.

Once the cover is off, you’ll see all of the internal parts of the system. Use a cotton swab or a small brush to clean off any dust or dirt that has built up. Be careful not to touch any of the delicate components inside. Here we will discuss the complete process of PS4 fan clean, in detail.

PS4 Fan Clean

Warning for PS4 Fan Clean Process

“Never clean the fan by using a vacuum cleaner or any other type of high-pressure blower,” “This may cause huge damage to your system.”

PS4 fan clean Advice: We advise users to use a dry, soft cloth to clean the fan. It also recommends that users back up their saved data before cleaning their console. “We can’t be responsible for any damage you may do to your PS4 Console system”.

Things You Need for PS4 Fan Clean

  • TR9 Torx security bit screwdriver. 
  • Standard Phillips-head screwdriver.
  • Knife or other sharp object.
  • Can of compressed air. 
  • Cotton swabs and/or cotton balls.
  • Flashlight.
  • Piece of tape to hold the screws and the Paper towel. 
  • A cleaning brush or old toothbrush.

Console gaming is a huge market, and Sony knows that it’s PlayStation 4 is a key product in its lineup. The PS4 has been out for a few years now, and with the release of the PlayStation 4 Pro, there are many people who may be considering purchasing one. If you have an original model of the PS4 console, keep in mind that, the action of opening and cleaning your console will void your warranty (the guarantee is valid for one year after you purchase the console).

The fan on the PS4 can get clogged with dust and debris over time, which can cause the console to overheat. If your PS4 is overheating, it will automatically shut down to protect its internal components. If you’re having this issue, you can try cleaning the fan yourself using a small vacuum or compressed air.

PS4 Fan Clean

How To Do PS4 Fan Clean?

The complete guide to the PS4 fan clean process.

1. Shutdown and Unplug Your PS4

To fully shut down your PS4 follow the steps given below.

  • Hold the Playstation button from your Controller.
  • Now, Quick Menu will Open.
  • Goto the power option.
  • Click on the Turn-OFF PS4 button.
  • Wait for a while until all the lights of your PS4 turn off.
  • Now, unplug the power cable, HDMI cord, or any other thing that will be attached to your PS4 console.

2. Remove Screws And Back Stickers

PS4 Fan Clean Process: Now, remove the stickers from your PS4 console. the middle sticker is the warranty sticker and the other two are not used for this purpose. by the way, you need to remove the stickers. once you remove the sticker by using the knife, now, you can easily see the screws. now, the time you need to use your TR9 screwdriver to remove the screws. 

3. Remove the PS4 Cover

PS4 fan Clean Process: Here, after removing the screws and sticker, it’s time to remove the PS4 upper cover. once you remove the screw successfully. you can easily remove the cover by applying a little bit of force to push the cover-up. keep in mind that don’t apply a lot of force to remove the cover, it can damage your PS4 Console.

4. Remove the Power Supply Unit From Your PS4 Console

PS4 Fan Clean Process: here we need to remove the power supply unit from the PS4 console. it’s not a lengthy process, you just need to locate the 5v screws on the power supply unit and remove them one by one. to remove the screws, a Phillips-head screwdriver is essential. these screwdrivers don’t slip from your hand while you focus on the work.

After removing the screws, now, it’s time to remove the PSU, to do this grab the power supply unit through both ends and lift it up slightly. keep in mind that don’t apply a lot of force to lift up your power supply unit.

Now keep the power supply unit in any safe place, and move forward with the further process.

PS4 Fan Clean

5. Blow the Dust From Your PS4 Console

PS4 fan Clean Process: now, it’s time to hold your can of compressed air. once you see the fan of your PS4 console. you need to remove all the dust from the interior.

Insert the straw of the can in any hidden corners t remove all the dust particles. place the canned straw at the top of your PS4 console fan and use it to remove the dust from the PS4 fan. keep in mind never use the burst of air directly to the fan, it will damage your PS4 fan. blow the air burst near the fan to keep it clean.

It is essential if you blow a short burst of air on all the internal structures of our PS4 console by using your can of Compresed air. Once you have done. it means you are successfully done the PS4 fan clean process.

6. Reassemble Your PS4

PS4 fan Clean Process: Now, it’s time to reassemble your PS4 console. here, you need to carry your power supply unit in your hands and place it in the PS4 console. once, the power supply unit is placed successfully, hold the screws and insert them by using the Phillips head screwdriver. keep in mind that you remove 5 screws, it means it is essential to re-insert 5 screws again.

7. PS4 DataBase Rebuild

To Rebuild the PS4 database follow the steps given below.

  • Shut down your PS4 console.
  • Hold the power button until you hear a beep.
  • Continue your holding until you hear a second beep from your PS4 console.
  • Connect the controller to your PS4 console.
  • Now, hit the Power station button.
  • Locate the Rebild Database option, choose it, and confirm the whole process.

Wrapping Up

I hope you will enjoy this blog and quickly understand how to do PS4 fan clean. we will discuss the whole process of PS4 fan clean and also discuss all the problems that you need to face whether you open your PS4 console for the cleaning process. we will also mention all the important gadgets that are essential for the PS4 fan Clean operation.

LEAVE A REPLY

Please enter your comment!
Please enter your name here