how to take an Xbox one controller apart
how to take an Xbox one controller apart
Sharing is caring
  •  
  •  
  •  
  •  
  •  
  •  

Are you searching for How to Take an Xbox One Controller Apart? this article is for you, here we will discuss How to Take an Xbox One Controller Apart step by step.

The Xbox controller is a device that allows the players to play video games. It is also used in other places such as on the TV, at home, in the office and so on. The Xbox controller is a very complicated device that has many parts. Therefore, it needs to be properly maintained by the users.

How to Take an Xbox One Controller Apart step by step guideline: The Xbox controller is made of two parts: the body and the wireless receiver. The body of the controller is made up of rubber and plastic parts, while the wireless receiver is made out of metal. It is one of the most popular controllers in the world. Its popularity can be gauged from the fact that it has been used by millions of people all over the world.

how to take an Xbox one controller apart

Before discussing How to Take an Xbox One Controller Apart, take a look at the body of the Xbox controller. The body and wireless receiver are connected by a cable that runs from one side to another, with a plug at each end. The cable may have a connector on one end that plugs into an external power source, such as an USB port or a docking station; or it may have a connector that plugs into an internal power source, such as an AC adapter or battery pack; or it may have no connector at all. In some cases, the external power source must be connected directly to the controller.

How to Take an Xbox One Controller Apart- Guide

The controller is not only used by gamers but also by other people who need to take it to a physical location. They need to take it with them when they go on a trip or when they are travelling somewhere on business trips. let’s discuss How to Take an Xbox One Controller Apart?

The controller itself consists of a lot of different parts that are used together to make up a whole system. The most important part is the controller base which controls all other parts and also provides all inputs for the console itself.

There are many ways to take apart the Xbox one controller. But you don’t have to be a professional to do it. It is easier if you know how to take an Xbox one controller apart.

Step 1

let’s discuss how to take an Xbox one controller apart by following the simple steps.

The first step of how to take an Xbox one controller apart is taking the right tools. right tools mean (Torx T8 Security Driver, Philips Screwdriver, X-Acto Knife, and Mini Flat-Head Screwdriver.

Step 2

The second step of how to take an Xbox one controller apart is starting disassembling your Xbox controller. first remove the battery case, and then open all the screws with screw driver. if you get serial number sticker inside the battery remove it. Now, removing the screws from your Xbox controller. make sure that you put all the screws together after removing. because they are so tiny, and if you don’t keep them carefully they can be lost. and you need to face big problem.

Step 3

The step three of how to take an Xbox one controller apart is Remove the back part of the controller. you need to hold the upper part and pull the back part, keep in mind don’t push so hard because it can be damage your Xbox controller cable connections. remove the upper part (trigger area) slowly.

When yu locate the circuit, you need to remove it from the body. you see 5 joining points on your circuit board. 2 are on the right, 2 are on the left part, and one is at the middle of the circuit board. you need to remove all the joining points carefully. once you have done remove the circuit board from the body.

how to take an Xbox one controller apart

Step 4

The fourth Step of how to take an Xbox one controller apart is removing rubber pads and pieces. you need to remove all the buttons one by one. when you try to remove the rubber piece, first, you need to remove the D-pad screws. D-pad have 2 screws on the back part. at this stage Philips screw driver is help full, use it to remove the D-pad.

Step 5

the fifth step of how to take an Xbox one controller apart is remove the top plate. Hold the Right button, left button and push the controller down. then lift the top plate and remove the left and right button easily.

After this action, the next step is remove trigger arms. Grab the trigger and separate it. for this section you need push the trigger and trigger arms softly.

This is the complete process of how to take an Xbox one controller apart. hope you will understand how to take an Xbox one controller apart.

Xbox

Wrapping Up

I hope you will enjoy this blog and quickly understand how to take an Xbox one controller apart. we will discuss the whole process of how to take an Xbox one controller apart in easy steps.

Also Read

How Long do Graphics Cards Last

How to Crouch in Fortnite- Guide

How To Duplicate Page in Word- Procedure

How to Make Siri Say What you Want

LEAVE A REPLY

Please enter your comment!
Please enter your name here